Search Results

The metal with chrome finish was an option fo GT6's and will fit all years. It is in very good condition. This is the last one I have and they are rare to see. If you have them, you might want to pick up a spare... Actual part pictured. Please...

Price: $64.95

This is the front crankshaft pulley for the GT6 with one pulley . It has been washed and checked for damage. Numbers on pulley are R21121 B HOLSET The rubber is still solid and holds tight... We are a repair shop who is selling the inventory from over 40 years of...

Price: $99.99

This is the front crankshaft pulley for the GT6 with one pulley . It has been cleaned and checked for damage. Numbers on pulley are BD4. The rubber is still solid and holds tight but has cracking. There is a dent in the pulley from someone pounding it off but I...

Price: $99.99

This is an original GT6 1966 to 1973 air cleaner base The metal is in good condition. It needs painting. Otherwise in very good condition... We charge shipping costs only, no handling or other fees. Costs are determined by the shipper, not by us. If the EBAY shipping calculator is...

Price: $99.95

This is an original GT6 exhaust header from 1965 -1967. This is for the "low port" head design. These were removed from a vehicle many years ago and have been in storage. Recently cleaned and oiled to stop further rusting. Seems solid in all places... There are repairs to each...

Price: $199.95

This is an original GT6 intake manifold from 1965 -1967 only. Cast in part is STANPART V2017 306483 . DARCAST DA 21664F. The corner where the intake is bolted to the exhaust is broken off. SE PICS Does not affect operation. We used to cut them off as owners would tighten...

Price: $299.95

This is an original OEM GT6 flywheel with starter ring gear. This is in very good condition. SEE PICTURES OF TEETH . It has been cleaned and oiled for rust protection. These are NLA or NO LONGER AVAILABLE Weight is 30 pounds... We are a repair shop who is selling the...

Price: $199.95

This is a front disc wheel hub from a GT6. It was removed from the Drivers side but fits both sides. NLA no longer available... We are a repair shop who is selling the inventory from over 40 years of accumulation. We back up what we say. The part in...

Price: $75.00

This is an original GT6 swivel axle pair . Includes the steering arms and caliper mounts. Needs cleaning and refurbishing... We are a repair shop who is selling the inventory from over 40 years of accumulation. We back up what we say. The part in the picture is the one you...

Price: $249.95

This is the pinion, gear, and housing for the GT6 and . It is white and has 15 teeth. Check your gear number and color prior to ordering... We are a repair shop who is selling the inventory from over 40 years of accumulation. We back up what we say. The...

Price: $99.99

This is an original GT6 intake manifold from 1965 -1967. It has 1.5 inch carb side and 1 inch engine side ports. Cast in part is STANPART V2926 307044 . It is in good shape. Thiis is for the "STEP HEAD" design. No cracks or repairs... We are a repair...

Price: $174.95

This is an used GT6 locking chrome gas / petrol cap This was fitted to years 1971 to 1973. There is some damage due to sanding on one corner. See picture. Otherwise, the chrome is in good condition. It has the mounting brackets with it... We are a repair shop who...

Price: $99.95

This is an original GT6 rear driven flange and inner axle. This is one of two in stock that were purchase decades ago for replacement parts. Excellent condition. It has been cleaned and oiled... We are a repair shop who is selling the inventory from over 40 years of accumulation...

Price: $149.95

This is an original GT6 rear driven flange and inner axle. This is one of two in stock that were purchased decades ago for replacement parts. Excellent condition. It has been cleaned and oiled... We are a repair shop who is selling the inventory from over 40 years of accumulation...

Price: $149.95

This is a used early camshaft from an early MK 1 engine. Washed only, not sand blasted as some do. ID on casting is STANPART 3067854... Lobes are front to back... 1.298, 1.299, 1.300, 1.296, 1.304, 1.297, 1.303, 1.302, 1.302, 1...

Price: $149.99

This is a GT6 head. It was measured at 3.324 inch thickness. Original nominal thickness stated in parts catalog as 3.300 so is unshaved / unmilled... casting # 308351 V3119 and... stamped number 517528... It has been cleaned and checked for cracks... Original and accurate. It has been fluxed...

Price: $525.00

This is a GT6 head from the early engines. It was measured at 3.35 inch thickness. Original nominal thickness stated in parts catalog as 3.300 so is unshaved / unmilled... casting # V2921 and... NO stamped number... It has been cleaned and checked for cracks... Original and accurate. It...

Price: $525.00

This is the mainshaft and gear set from a GT6. I see no damage to any gear or shaft. Use for parts or as a rebuild.This was initially used in the early GT6 transmissions, until about 1970. We do not know what has been changed in your car over...

Price: $199.95

This is the mainshaft and gear set from a later GT6. I see no damage to any gear or shaft. Use for parts or as a rebuild.This was initially used in the later GT6 transmissions, after 1970. We do not know what has been changed in your car over...

Price: $299.95

This is an original badge for the GT6+ trunk. It is made of metal and all mounting pins are good. Chrome has some corrosion and there are some small cracking in the filler... Actual part pictured. Please check your part against the picture and description for proper fit. Many cars...

Price: $19.95

These a single used chrome original GT6+ hubcap. It is chromed metal. Needs polishing. One edge is bent, probably from hitting a curb, (SEE PICTURES) and back plate is rusty. Chrome seems good except for some scratches on the outside edge... Actual part pictured. Please check your part against the...

Price: $44.95

This is the mainshaft from a TR4 or early TR6. I see no damage to the shaft. We do not know what has been changed in your car over the years, either whole transmission changes or internal parts changes and modifications. (SEE PICS) This shaft has a 10 spline output...

Price: $99.95